Hot sale Factory Molding Rubber Hose - Dredging Hose – Great Wall Detail:
I.D.4″ to 28″ are available
Inner tube: Synthetic fiber / NBR / EPDM, according to different medium.
Reinforcement: high tensile fiber cotton yarn braids with 1 helix wire embedded
Cover: abrasion and aging resistant synthetic rubber
Temperature range: -20 up to +85 degree with air or water service
Application: it is suitable for water pump, river water suction and discharge, field irrigation works
|
ITEM |
SIZE |
I.D. |
THICKNESS |
O.D. |
W.P. |
B.P. |
LENGTH |
|
/ |
INCH |
MM |
MM |
MM |
BAR |
BAR |
M/PC |
|
DR-100 |
4″ |
100 |
20 |
140 |
10 |
30 |
1M – 12M |
|
DR-125 |
5″ |
127 |
20 |
167 |
10 |
30 |
1M – 12M |
|
DR-150 |
6″ |
150 |
20 |
190 |
10 |
30 |
1M – 12M |
|
DR-200 |
8″ |
200 |
25 |
250 |
10 |
30 |
1M – 12M |
|
DR-250 |
10″ |
250 |
25 |
300 |
10 |
30 |
1M – 12M |
|
DR-300 |
12″ |
300 |
25 |
350 |
10 |
30 |
1M – 12M |
|
DR-350 |
14″ |
350 |
30 |
410 |
10 |
30 |
1M – 12M |
|
DR-400 |
16″ |
400 |
30 |
460 |
10 |
30 |
1M – 12M |
|
DR-450 |
18″ |
450 |
30 |
510 |
10 |
30 |
1M – 12M |
|
DR-500 |
20″ |
500 |
30 |
560 |
10 |
30 |
1M – 12M |
|
DR-550 |
22″ |
550 |
35 |
620 |
10 |
30 |
1M – 12M |
|
DR-600 |
24″ |
600 |
35 |
670 |
10 |
30 |
1M – 12M |
|
DR-650 |
26″ |
650 |
35 |
720 |
10 |
30 |
1M – 12M |
|
DR-700 |
28″ |
700 |
35 |
770 |
10 |
30 |
1M – 12M |
Structure
1. Tube: Black abrasion resistant Natural Rubber
2. Reinforcement: Multiple plies of polyester fabric with a spring steel helix wire.
3. Cover: Neoprene
Suction hose is used with dredger for silt/gravels conveyance. It sucks up the mixture of silt and water using negative pressure. Mostly used with these hoses are the rubber flange/steel backing flange and the Double Action flange. They can be supplied in any size, and depending on application, with 100% vacuum capability and high implosion pressures. For use with gimbals and in the ladder of cutter dredgers we can equip them with small bending radius suction hoses.
Features
1. Outer cover with excellent abrasion resistance and UV protection.
2. Inner cover with excellent abrasion resistance and high quality.
3. Wearing colored indicator layers.
4. Single foam flotation casing to prevent water absorption.
5. Bear the high pressure of work.
6. The size of flange is at customers’ request.
7. Bending angle: in working condition, the bending angle is from 0° to 45°.
8. Low center of gravity, strong ability of the anti-wave, good stability.
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Hot sale Factory Molding Rubber Hose - Dredging Hose – Great Wall, The product will supply to all over the world, such as: Hamburg, Oslo, Brisbane, We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We will always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!
By Klemen Hrovat from Curacao - 2018.11.04 10:32
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Frederica from Lyon - 2018.06.30 17:29
