What Profile Is Silicone Rubber Sheet?What Are The Characteristics And Uses Of Silicone Rubber?

Silicone rubber sheet is a very special material, which is widely used, including the construction industry. Therefore, it is used when building and renovating houses.

What profile is the silicone rubber sheet?

Silicone rubber sheet is actually made of silicone rubber, and silicone rubber can be divided into two types: organic silica gel and inorganic silica gel. Inorganic silica gel is a highly active adsorption material. It is finally made by reacting sodium silicate and sulfuric acid, and after a series of treatments such as aging and acid foaming.

Silica gel is also an amorphous substance with a chemical molecular formula of mSiO2.nH2O. It is insoluble in water and other solvents, non-toxic and tasteless, and will not react with any substances other than strong alkali and hydrofluoric acid. It is also widely used and can be used as a special material in aviation, cutting-edge technology, and military technology departments, as well as in construction, electrical and electronic, textile, automobile, machinery, leather and paper, chemical light industry, metal and paint, medicine and medical treatment, etc. field use.

Silicone Rubber Sheet06
What are the characteristics and uses of silicone rubber.

1. Product features: It has good insulation performance, aging resistance, sealing performance, and good adhesion and high strength. It is a non-corrosive one-component room temperature vulcanized silicone rubber. Within the temperature range of ℃, there will be no problems in long-term use.

2. Product use: The main uses of silicone rubber are insulation, moisture-proof, sealing, bonding, anti-vibration, etc., such as used as bonding and sealing materials for semiconductor equipment, electronic appliances and other equipment; also used in aircraft cockpits, instrument cabins, Sealing material for relevant parts in machine building. This material is also a very ideal material for elastic adhesives such as aviation, electronics, and electrical manufacturing.

3. Instructions for use of the product

a. The surface of the product needs to be cleaned first, and the adhering rust, dust, oil, etc. should be cleaned up first;

b. Then start gluing, unscrew the hose, install the plastic nozzle, and then install the required size with a blade to open the opening, so that it is easy to squeeze the glue to the required position;

c. After use, the next step is to wait for curing, and then put the coated parts in a stable position and wait for curing. When curing, it is cured from the outside to the inside. The curing depth of the glue is 2-4mm. It needs to be cured within 24 hours and the humidity is 55%. If the depth exceeds this depth, the time will be prolonged. A lower value will also prolong the curing time.

Post time: Jul-07-2022